Angelo Po 0N1FR1ID, Руководство пользователя

Страница: 136 / 154

GB
- 16 - 3269870_inst_GB_rev.2 ENGLISH
EQUIPMENT DECOMMISSIONING, DEMOLITION AND DISPOSAL
When decommissioning the appliance, a series
of procedures must be carried out to ensure
that the appliance and its components are not a
hindrance and are not easily accessible.
To ensure that the appliance cannot constitute
hazards for people or the environment, all ener-
gy sources (electricity, etc.) must be disconnect-
ed and rendered unusable, and any liquids pre-
sent must be drained (lubricants, fl uids, etc.).
Place the appliance in a suitable area which is
not easily accessible, with barriers to prevent an-
yone from accessing it.
When scrapping, sort all components by chemi-
cal characteristics and dispose of them sepa-
rately in accordance with the relevant legal re-
quirements.
Importante Important
Do not dump non-biodegradable products,
lubricating oils, and non-metallic compo-
nents (rubber, PVC, resins, etc.) in the envi-
ronment. Dispose of them in compliance with
the relevant laws.
REPLACEMENT IGNITION UNIT
(0N1FR7ID-0T1FR7ID)
To carry out this operation, proceed as follows.
1)
Turn off the gas supply tap.
2)
Open the hatch (A) .
3)
Undo the screws (B) and replace the ignition
unit (C) .
4)
Close the hatch (A) .
A
B
B C