Angelo Po 0N1FR1ID, Руководство пользователя

Страница: 25 / 154

- 3 -
3269870_ut_GB_rev.2 ENGLISH
GB
IDENTIFICATION OF CONSTRUCTOR AND APPLIANCE
La targhetta di The nameplate shown here
is fi tted directly to the appliance. It contains
references and all essential information for
operating safety.
A)
Extra nameplate
a
1
) Country of use
a
2
) Appliance category
a
3
) Type of gas
a
4
) Gas pressure
a
5
) Type of fume exhaust vent
B)
Nameplate
b
1
) Appliance model
b
2
) Type of customisation
b
3
) Manufacturer identifi cation
b
4
) Serial number
b
5
) Protection class
b
6
) EC conformity mark
b
7
) Reference standard
b
8
) EC certifi cate number
b
9
) Product family type
b
10
) Type of gas
b
11
) Rated power (kW)
b
12
) Gas consumption
b
13
) Testing gas indicator frame
b
14
) Voltage (V)
b
15
) Frequency (Hz)
b
16
) Electricity power consumption (W)
b
17
) Test voltage indicator
b
18
) Date of construction
C)
Testing gas plate
c
1
) Type of gas
c
2
) Gas pressure
The installer must select the plate (A) and ap-
ply it alongside the nameplate relating to the
country of use, and must mark the relative ap-
pliance class (Type A = standard fume exhaust
vent).
If the appliance is to be used with the same
type of gas as used by the constructor for test-
ing, the installer has to remove the plate
(C)
and apply the indicator (b13) against the data
of the gas for use on the nameplate.
PROCEDURE FOR REQUESTING SERVICE
For all requirements contact the agents or the
headquarters of Angelo Po which can be found
in the contacts section of the website http://
www.angelopo.com.
When requesting service, state the data pro-
vide on the nameplate and provide a descrip-
tion of the fault.