Angelo Po 0N1FR1ID, Руководство пользователя

Страница: 35 / 154

- 13 -
3269870_ut_GB_rev.2 ENGLISH
GB
FILTERING OIL
To carry out this operation, proceed as follows.
Importante Important
Before proceeding, allow the appliance to
cool for 10÷15 min., so that the oil reaches a
temperature between 50÷120°C.
2)
Open the hatch (A) .
3)
Fit the extension (B) onto the tap (C) .
4)
Place the container (D) and the fi lter (E) , both
available as optionals, underneath the exten-
sion
(B) .
5)
Turn on the tap (C) to empty the well.
6)
Turn off the tap (C) on completion of the
operation.
7)
Close the hatch (A) .
Caution - Warning
Do not dump oil in the environment; dispo-
se of it in accordance with the laws in force in
the country of use.
A
B
C
C
E
D
RESETTING THE APPLIANCE
If the safety thermostat is tripped, the applian-
ce has to be restored to the initial working
conditions as follows.
1)
Allow the oil to cool to 30-40°C.
2)
Open the hatch (A) .
3)
Press the button (B) of the safety thermostat
tripped to restore the gas supply .
Importante Important
To identify the thermostat that has been
tripped, check which burner has cut out and
press the corresponding button.
4)
Close the hatch (A) .
B
A
A