andrews CWH 30/201, Руководство по эксплуатации

Страница: 30 / 48

Commissioning 30 MAXXfl o EVO
3.7 COMPLETE PARAMETER LIST
During the commissioning process access to the complete parameter list is not considered necessary for
the commissioning engineer. The complete parameter listing is available in section 4.5 of this manual.
Please note that the number of parameters shown under “commissioning” mode will be greatly reduced
from those of “engineer” mode.
Refer to section 3.1 on page 30 for details on how to logon to “Commissioning” mode
3.8 COMMISSIONING WIZARD
The commissioning wizard is not required to setup of the heater parameters during the commissioning
process, but can be used if preferred. The wizard is arranged in stages/sections and the wizard will only
give access to parameters that are relevant to the level of access being used.
If commissioning mode is selected accidently, to exit the wizard you must continue and skip through the wizard until
“end of wizard” is reached. Pressing and holding the control knob for more than 3 seconds will not return you to the
home screen.
Complete parameter list
Commissioning wizard
Complete parameter list
Commissioning wizard