andrews CWH 30/201, Руководство по эксплуатации

Страница: 10 / 48

End user 10 MAXXfl o EVO
2.0 END USER OPERATION
2.1 THE HOME PAGE
Evaluation of information displayed:
Heater GUI Display
The start page for the heater GUI unit displays the most important information on the water heater and system
operation mode. There are no settings that can be applied whilst in this screen.
2.2 SETTING THE TIME AND DATE
To set the current time and date proceed with the following steps
To set the time:
1. Rotate the control knob until the settings tab is highlighted and press the control knob. “Regional settings (1/3)”
should already be preselected
2. Rotate the control knob to select the time fi eld value and press the control knob
3. Rotate the control knob and enter a new hour value by pressing the control knob
4. Rotate the control knob and enter a new minute value by pressing the control knob
To set the date:
5. Rotate the control knob to select the date fi eld and press the control knob
6. Rotate the control knob and enter a new date, month and year value by pressing the control knob after each item
set
7. Rotate the control knob for additional regional settings or exit regional settings with “Back”.
8. It is also possible to adjust the dates set for the start and end of summer time, for the purposes of automatic
clock adjustment
Cascade fl ow temp
60.1
o
C
DHW temp 1 58.9
o
C
Line only displayed for
90 or 120 kW models
Regional settings (1/3)
Time
14:42
Date
09.08.2016