End user
11
MAXXfl o EVO
2.3 SETTING DHW HEATING TIME PROGRAM
In order to set the DHW heating time program the Domestic Hot Water operation mode of the heater must be
set to “ON”.
This is achieved by turning the operation switch on the front facia of the heater from standby (0) to on (I)
Select the Domestic Hot Water (DHW) tab by rotating the control knob and pressing the control knob. The operating
mode should be displayed as “On”. See example below:
With the DHW tab selected rotate the control knob to highlight the time program fi eld,
Press the control knob to enter the time clock setting page
.
Once the fi eld is selected rotate the control knob to reach
the time programming screen.
OPERATION SWITCH
Domestic Hot Water
Operating mode
On
Temporary
...
Nominal set point
28
o
C
Time program
00 12 24
Domestic hot water
Operating mode
On
Temporary
...
Nominal set point
28
o
C
Time program
00 12 24
When operation switch is set to ON (I)
DHW operating mode should be ON
If the operating mode is not ON when the
operation switch is ON, change the mode to ON
When operation switch is set to STANDBY (O)
DHW operating mode will be OFF
Содержание CWH 30/201
Страница 2: ...2 MAXXflo EVO Blank Page ...
Страница 47: ...47 MAXXflo EVO Blank Page ...
