andrews CWH 30/201, Руководство по эксплуатации

Страница: 15 / 48

End user 15 MAXXfl o EVO
2.6 TEMPORARY DHW OPERATION FUNCTION
Outside of the programmed operation times for water heating, the operation of the water heater can be turned on for
a single occasion where the domestic hot water will be heated to the nominal set point. The heater control returns to
normal operation using pre-settings as soon as the hot water reaches set point.
This function is possible to activate even if the operation switch on the front facia is in the
STANDBY (O) position
Once this function has been started it can only be stopped by changing the operation switch
position 3 times. e.g. If this function has been started with the operation switch in STANDBY (O)
then it will be necessary to switch to ON (I) then back to STANDBY (O) to cancel the function.
With the icon highlighted press the control knob to select the Domestic hot water page. Using the control knob
move the indicator over the “Temporary” fi eld and press the control knob to highlight the fi eld
Rotate the control knob to change the “Temporary” fi eld from “...” to “Recharging” and press the control knob to select
the value
The heater operation in now active and will recharge the DHW tank water to the nominal set point previously pro-
grammed
It is not possible to view or change the nominal set point of the hot water once this operation has been
started. If you have any doubts as to the current DHW set point, cancel the operation (as described
above) and start the heater using the operation mode to view and set the nominal set point.
Domestic Hot water
Operating mode Off
Temporary ---
Nominal set point ---
Time program
00 12 24
Domestic hot water
Operating mode Off
Temporary Recharging
Nominal set point ---
Time program
00 12 24