AND AD-4401A Скачать руководство пользователя страница 16

Страница: 16 / 84

AD-4401A Page

7. BASIC WEIGHING FUNCTIONS

When the AD-4401A is powered ON, all the segments of the display turn ON and OFF to check the display.

Then the AD-4401A enters the normal mode and starts weighing.

If the AD-4401A is powered OFF during the OFF mode (with the display OFF), the AD-4401A will be in the

OFF mode when powered ON.

●

Main display

The contents in the main display in the normal mode are as follows.

- Weight value

- Positive overload

- Negative overload

●

Sub-display

Select the function of the sub-display (FncF-04) from the following:

Gross value, Net value, Tare value, Final weight, Total weight, Number of accumulations, Weighing

sequence error

●

Display OFF (OFF mode)

Turn the display OFF.

Operation: ON/OFF key

●

Zero setting

The gross value is set to zero when the weight value is within the zero setting range (CALF-05).

Operation: ZERO key, Control input

Setting: Tare and zero setting at unstable weight. (CALF-10)

●

Zero clear

The zero setting value is cleared.

Operation: Function key (FncF-02), Control input

●

Zero tracking

The gross value is set to zero automatically when the zero tracking time (CALF-06) has passed while the

gross value is maintained within the zero tracking width (CALF-07).

Note:

The function is enabled only when the gross value is within the zero setting range (CALF-05).

Содержание AD-4401A





















































































Результаты поиска

Содержание AD-4401A

Отзывы:

Бренды по названию

Популярные бренды

AND AD-4401A, Инструкция по эксплуатации

Результаты поиска

Содержание AD-4401A

Отзывы:

Бренды по названию

Популярные бренды