NOVUS AUTOMATION
84/85
19.3
CERTIFICATIONS
FCC
Contains FCC ID: N7NHL8549G
This device has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the device is operated in a commercial environment. This device
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, it may cause
harmful interference to radio communications.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this device.
RF Exposure: To satisfy FCC RF exposure requirements, a separation distance of 20 cm or more should be maintained between the antenna of
this device and persons during operation. To ensure compliance, operations at closer distances than this are not recommended. This device and its
antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
IC
Contains IC: 21571-AVTEG001
This device complies with Industry Canada's license exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device
may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the
device.
The installation of the transmitter must ensure that the antenna has a separation distance of at least 20 cm from all persons or compliance must be
demonstrated according to the ISED SAR procedure.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for
the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that
the equivalent isotopically radiated power (EIRP) is not more than that necessary for successful communication.
CE Mark / UKCA
This is a Class A device. In a domestic environment, it may cause radio interference and require the user to take proper measures.
ANATEL
This device is homologated by ANATEL, in accordance with the procedures regulated by Resolution 242/2000, and meets the technical
requirements applied.
This equipment is not subject to the protection from harmful interference and may not cause interference with duly authorized systems.
For more information, see the ANATEL website
NORM CISPR 22
This product is not suitable for use in domestic environments as it may cause electromagnetic interference. Otherwise, the user will be required to
take whatever measures are necessary to minimize such electromagnetic interference.
