NOVUS AUTOMATION
51/85
13.1.7.1
COMPARISON BETWEEN CHANNELS
Figure 21 –
Comparison between channels
You can create a comparison alarm between two channels. When selecting the operation and channels to be compared, you can add an offset
value (corresponding to the parameter highlighted in red) to the second selected channel. Thus, the value of the first channel will be compared to
the value of the second channel and the configured offset value.
13.4
DIAGNOSTICS
It is possible to view the
LogBox Wi-Fi
diagnostics tab by clicking the
Diagnostics
button located on the
NXperience
home screen. By clicking on
it, the software will monitor some device states. The information update range is 1 second.
13.4.1
LOGS
Figure 22 –
Diagnostics Screen: Logs
•
Log Status:
Displays information about the log status, such as the number of recorded logs, the available memory, the number of active
channels, and the date of the first and last log in the
LogBox Wi-Fi
memory.
•
Log Control:
Allows you to start or pause
LogBox Wi-Fi
data logging. For this option to be active, the "By Software" parameter must be
enabled in start and/or end of log mode.
