NOVUS AUTOMATION
41/85
•
Debounce:
If the configured sensor type is Dry Contact, a debounce time will need to be configured for edge detection. Debounce is the
sensor stabilization time – the minimum time at which the sensor must remain at the logical level of interest for the detected edge to be
considered valid. The minimum configurable debounce time is 50 milliseconds; the maximum is 6 seconds.
•
Application:
Allows you to select the application type of the digital input. In this case, the type "Count".
•
Sensor Factor:
Allows you to configure the sensor factor used at the digital input. This parameter can be found in the sensor manual as
k-
factor
.
LogBox Wi-Fi
provides three units for the sensor. The custom unit option can be selected to meet any need not previously listed by the
device.
•
Acquisition Interval Counting:
Allows you to configure the device to log the performed count during the acquisition intervals.
o
User
Unit:
Allows you to configure a custom unit for the count performed per acquisition interval. The field allows you to describe the unit
with up to eight characters.
•
Volume Since Last Reset:
Allows you to configure the device to log the accumulated count since the last reset.
o
Unit:
Allows you to configure a custom unit for the count performed per acquisition interval. The field allows you to describe the unit with
up to eight characters.
o
Reset:
See
section.
