NOVUS AUTOMATION
9/85
SCREEN
MNEMONIC
INFORMATION
DESCRIPTION
KEYS FUNCTION
4.
Digital Input
Pulse Count:
Accumulator
Displayed for 2 seconds before moving to
digital input screen – Pulse Count:
Accumulator.
This screen is updated by the display update
interval.
When enabled and configured in the "Pulse
Count" mode and then set to "Volume since
Last Reset" (
Application
parameter /
Flow
Rate
function) or the option "Accumulated
Count Since Last Reset" (
Application
parameter /
Count
function), displays the
volume or count accumulated since the last
digital channel reset. If it is not configured,
this screen will not be displayed.
Uses the three lines of the display to
display the accumulated volume or count.
Key held down or long touch: No action.
Key held down or long touch: No action.
Both keys held down: No action.
5.
Digital Input
Event Log or Logs
Control
Displayed for 2 seconds before accessing
the digital input screen – Event Log or Logs
Control.
This screen is updated every time an event is
detected in the digital input.
When enabled and configured in "Event
Log" or "Logs Control" modes, it displays
the last event detected at the digital input.
Line 1: Edge detected in the event:
0 – Falling edge
1 – Rising edge
Line 2: Day. Month of the event (if the 24-
hour format is selected); Month. Day of the
event (if the AM/PM format is selected).
Line 3: Hour: Minute of the event.
Key held down or long touch: No action.
Key held down or long touch: No action.
Both keys held down: No action.
6.
Power Status
Displayed for two seconds before accessing
the "Power Status" screen.
This screen will be updated with information
about the device power.
Displays information about the device
power source.
Line 1: External source voltage.
Line 2: Battery level.
Line 3: Value of battery voltage.
Key held down or long touch: No action.
Key held down or long touch: No action.
Both keys held down: No action.
