Analytik Jena CyBio Well vario OL3381-25-300, Руководство по эксплуатации

Страница: 127 / 164

CyBio
®
Well vario Release: 2017 111
Fault Removal
Illegal command Transfer cables are in a
non-conforming state.
Check transfer cables for
proper condition.
Software version not con-
figured for your system.
Check that available soft-
ware version is actually
configured for your system
(refer to Hardware system
information window in
[Devices] ) menu.
On failure to remove this
error, you should notify
the customer service.
Communication aborted User break of currently
running program
Microplate size not sup-
ported by software
System displays microplate
size that is not supported
by software.
Notify customer service
and request software ver-
sion
that is matched to this sys-
tem version.
Program memory location
not free
Reports attempted storage
of a program in a location
that is already occupied.
Delete program number,
then save a new program
at this location.
Note:
The
command which
relates to this error is not
supported in the given
program.
Piston drive failed to reach
upper end position
Piston motion has not
reached its upper end
position.
Remove this error by per-
forming a tip change. If
the error persists, repair
work is required. Notify
customer service
Piston drive failed to reach
lower end position
Piston motion has not
reached its lower end posi-
tion.
Remove this error by per-
forming an exchange of
tips. If the error persists,
repair work is required.
Notify customer service
Sum of all volumes in a
program unequal zero
The sum of volumes aspi-
rated and ejected in a pro-
gram is unequal zero. On
adding all signed cycle val-
ues up with each other,
their sum must equal zero
within a given program.
Correct setting values
appropriately.
Error message Cause Action for removal