Analytik Jena CyBio Well vario OL3381-25-300, Руководство по эксплуатации

Страница: 128 / 164

112 Release: 2017 CyBio
®
Well vario
Fault Removal
Sum of volumes too great The sum of all volumes
aspirated and dispensed is
too great. Valid values are
within the range of 2 μ l to
250 μ l.
On adding all signed cycle
values up with each other,
this range must not be
exceeded.
Correct setting values
appropriately.
Sum of volumes before
and after block is unequal
zero
The sum of volumes aspi-
rated and ejected in a cur-
rent block (program,
combined commands,
repeat modules) is
unequal zero. On adding
all cycle values up with
each other, their sum must
equal zero within a given
block.
Correct setting values
appropriately.
Text too long Text which is intended for
output to the system dis-
play is too long.
Shorten output text.
Table reached upper end
position
Table motion has reached
its upper end position.
Use keyboard at the
CyBio
®
Well vario to trig-
ger table motion into low-
ermost position. To do
this, press both direction
keys at the same time. This
will automatically trigger a
drive calibration routine.
Table reached lower end
position
Table motion has reached
its lower end position.
Use keyboard at the
CyBio
®
Well vario to trig-
ger table motion into low-
ermost position. To do
this, press both direction
keys at the same time. This
will automatically trigger a
drive calibration routine.
Unknown keyboard code The code of a key which
was pressed at the system
control panel is unknown
to software. This error
occurs following an
attempt to trigger a pro-
gram file that was created
using a more recent than
the currently installed soft-
ware version.
Use latest software version
in this case. If this can be
discarded as potential
error cause, the particular
file is likely to have suf-
fered damage. Create a
new program file.
Error message Cause Action for removal