Analog way ORCHESTRA ORC50, Руководство пользователя

Страница: 23 / 51

21
Output configuration
Once your device has been added into a Screen, you can
configure its outputs.
1/ On the Screen Setup page of the ORCHESTRA , press Edit
Outputs.
2/ Select the output, Main or Preview you wish to configure,
then select the output format (resolution), output rate, output
type as needed.
3/ Press Pattern , and select a pattern from the dropdown menu
to check your output settings are properly configured. When
you are satisfied, press Pattern again, and choose none to
revert to your image on screen.
Video Out configuration
The Video Out tab will be available only if the slave device has
an optional video card installed (for example a Di-VentiX II with
option VO-8044).
1/ In the Screen Setup page of the ORCHESTRA , press Edit
Video Out.
2/ Select the display mode for the slave device video out card,
then select the output format (resolution), output rate, and
signal type.
3/ Press Pattern to generate a pattern on the screen/device
plugged to the slave device video out card if you wish to check
the video Out setup.
4/ Press the OK button to confirm and return to the Screen
Setup page.
4/ Press the OK button to confirm and return to the Devices
page. The ORCHESTRA will connect to the device. Press the
OK button to return to the
Screen Setup
page.
* NOTE * : Screen parameters should all be available now that
a device is activated in the current Screen.