84
USER MANUAL
Set GPIO in the Web RCS
In
Extras
> GPIO, set the GPI and GPO actions.
Fig. 24 -
GPI
Setting name
Description / Setting selection
Polarity
Set when the GPI connector is active (
when powered
or
when unpowered
)
Mode
Select
No action
to disable triggers from this GPI.
Select
Take
and associate a Screen to trigger the transition when using the GPI
Take
In
Take
mode, select the Screen to take when triggering the GPI
State
Check if the GPI is currently
On
or
Off
Fig. 25 -
GPO
Setting name
Description / Setting selection
Polarity
Set the GPO connector status when active (
Closed
or
Opened
)
Mode
In
Manual
mode, the state can be defined by a user action through the Web RCS
or by an automation controller.
In
Tally
mode, the tally level will change when a defined input is used in a Screen.
Screen X (one line
per enabled Screen
in Tally mode)
Set the association of Input-Screen for
Tally
mode.
Select one input per Screen to return in the tally.
State
In
Manual
mode, set if the GPO is currently
On
or
Off
In
Tally
mode, check if the GPO is currently
On
or
Off
Содержание AQL-C
Страница 121: ...www analogway com 121 USER MANUAL...
