68
USER MANUAL
Input group signal
In
Inputs
, select an input. In
Group Signal
, the following settings are displayed:
Setting name
Description / Setting selection
Settings
Signal Type
Auto
,
YUV
,
RGB Full
(0-255) or
RGB Limited
(16-235).
HDCP
None*
;
Default
;
HDCP 1.x Only
or
HDCP 1.x and 2.x
Control
Black
On/Off
toggle. Display Black in place of the selected input group.
Freeze
On/Off
toggle. Freeze the input (useful for Color correction, Cropping or Keying).
HDR Processing
(only if HDR Processing is enabled in Preconfig > System)
Input Profile
Select the Dynamic range used for this input (
Auto
,
SDR
,
HDR10
or
HLG
BBC
)
Luminance
Select the nit level used for this input
BBC Mapping
(only for SDR with HLG BCC as internal profile)
Inverse
Tone
Mapping
or
Direct
Mapping
- Use
Inverse Tone Mapping
if internal processing and main input are using Limited
Range color space.
BBC Reference
(only for SDR with HLG BCC as internal profile)
Scene
Referred
or
Display
Referred
- Use
Scene Referred
for camera content.
- Use
Display Referred
for computer content.
BBC OETF
(only for Scene Referred)
Square
Root
or
Strict
*Disabling HDCP reduces possible problems when the content is not fully HDCP compliant. When input HDCP is disabled, HDCP-
protected inputs are not displayed.
Recommendation:
Always use high quality cables to prevent connection and bandwidth errors when using HDCP.
Input group pattern
When enabled, a pattern overrides any input signal. Most patterns offer adjustment to isolate a
particular color for easier troubleshooting and calibration.
In
Inputs
, select an input. In
Group Pattern
, the following settings are displayed:
Setting name
Description / Setting selection
Patterns
Enable
On/Off toggle. Display the pattern in input
Patterns
Select the pattern to display
Note:
- A pattern applies to all inputs in the same input group.
- For more information on pattern types, see
Содержание AQL-C
Страница 121: ...www analogway com 121 USER MANUAL...
