49
USER MANUAL
Set an output group for a Screen
1.
In
Preconfig
>
Screens / Aux Screens > Outputs tab, click an output.
2.
In
Configuration
, select
Screen
mode and
Group
type.
3.
Select the output group layout (
1x1
by default).
Selecting a higher group layout automatically groups the following output(s).
4.
If needed, enable rotation for the output group.
5.
In
Group Format
, set the format applied to every output of the group.
Tip
: Capacities are automatically assigned when setting a format.
Note:
- Using a group of two or more outputs adds a one frame latency.
- Enabling output rotation adds a one frame latency.
- Using both rotation and multi-output group at the same time only adds one frame latency.
- Enabling output rotation for a 1x1 output with capacity 2 disables the next output plug.
For more information on output rotation, see
Set a DPH104 output for a Screen
1.
In
Preconfig
>
Screens / Aux Screens > Outputs tab, click a DisplayPort output connected
to a DPH104.
2.
In
Configuration
, select
Screen
mode and
DPH104 Slicer
type.
3.
Select the Layout (
4x1
;
2x2
or
1x4
).
4.
If needed, enable rotation for every output of the DPH104.
5.
In
DPH104
Format
, set the format applied to every output of the DPH104.
Note
: The output resolutions supported by the DPH104 are 4x 1600x1200; 4x 1920x1080 and 4x 1920x1200.
Set an output for an Aux Screen
1.
In
Preconfig
>
Screens / Aux Screens > Outputs tab, click an output.
2.
In
Configuration
, select
Aux
mode.
3.
Select the Layer quantity (
2
by default).
Selecting a higher layer quantity automatically preempts the following output(s).
4.
In
Group Format
, set the format applied to the output.
Содержание AQL-C
Страница 121: ...www analogway com 121 USER MANUAL...
