Analog way AQL-C, Руководство пользователя

Страница: 82 / 121

82 www.analogway.com
USER MANUAL
Use timers in Screens and Aux. Screens
Note: Timers can be displayed in Multiviewers without being assigned as image slots.
Timers can be assigned to image slots. They can then be used in layers just like regular images.
1. In Images , click an image slot.
The image slot settings are displayed.
2. In Identification > Label, enter a label to rename the Image slot.
3. In Option, enable Downscale to capacity to resize the image when the image slot capacity is too low
for the image resolution.
4. In Content, select a timer to be used in this image slot.
The selected timer is now loaded as an image slot and is ready to be displayed in layers.
13.3 GPIO
The GPIO (or Tally) is a set of inputs/outputs to control the device externally and have a feedback from the
device. LivePremier units are equipped with 2x GPI and 8x GPO.
Pins table and GPIO connection
ON/OFF 2 GPO 4 GPO 8
ON/OFF 1 GPO 3 GPO 7
GPI 2 GPO 2 GPO 6
GPI 1 GPO 1 GPO 5
GPI return
(common) GPO return
(common)
GPO return
(common)
Fig. 22 - GPIO pins table
GPIO are optically isolated MOSFET, working as mechanical relays.
- GPI 1 and 2 have a common pin.
- GPO 1, 2, 3 and 4 have a common pin.
- GPO 5, 6, 7 and 8 have a common pin.
Each GPI can sink a current between 10mA/3V to 45mA/48V.
Each GPO can sink a current of up to 300mA maximum in the closed state and can accept up to 48V in the
opened state.
The courant leakage is less than 1μA when opened and the resistance is less than 2 ohms when
closed.
For more information, see
Fig. 21 - GPIO Phoenix connection example page 83.