Analog Devices ADIS1700 Series, Руководство пользователя

Страница: 96 / 121

Test ID Test Name Description Result Type Notes
3 Trig NIRQ
LED Configures the LED
pin. Triggers an image capture.
Trigger pin test passes if an im-
age is receive through PPI.
Verifies that the host processor
receives an interrupt on the
GPIO connected to NIRQ at
the end of the image transfer.
The LED pin test passes if the
LED pin goes high for the en-
tire duration of the exposure
and Is low otherwise. Result: Pass(0)/Fail(1)
Result Value:
(LSB) Trigger P/F (1/0)
Bit 1 NIRQ Available
Bit 2 NIRQ P/F (1/0)
Bit 3 LED Available
Bit 4 LED P/F (1/0) Test is unavailable if trigger pin
is not connected.
Test passes if the test for the
available pins passes.
6 GPIO 0 Subtest 1 : Tries to set this
GPIO to 0 while setting all the
other available GPIOs to 1
Subtest 2 : Tries to set this
GPIO to 1 while setting all the
other available GPIOs to 0 Result: Pass(0)/Fail( n)
Result Value: Test word
that failed if any. n > 0 is the subtest which failed
if any.
7 GPIO 1 Same as GPIO 0 Result: Pass(0)/Fail( n)
Result Value: Test word
that failed if any. n > 0 is the subtest which failed
if any.
8 GPIO 2 Same as GPIO 0 Result: Pass(0)/Fail( n)
Result Value: Test word
that failed if any. n > 0 is the subtest which failed
if any.
9 GPIO 3 Same as GPIO 0 Result: Pass(0)/Fail( n)
Result Value: Test word
that failed if any. n > 0 is the subtest which failed
if any.
10 PPI_DValid Configures the GPIO connec-
ted to the PPI_DVALID signal
as an interrupt source.
Subtest 1 : Sets an all zeros
word in the PPI FIFO and ena-
bles the PPI output. Checks
that an interrupt has been re-
ceived.
Subtest 2 : Sets a 0x1FFF word
in the PPI FIFO and enables
the PPI output. Checks that an
interrupt has been received. Result: Pass(0)/Fail( n)
Result Value: Test word
that failed if any. n > 0 is the subtest which failed
if any.
Camera Module Messages
ADIS1700x Vision-Sensing Camera Module User Guide 7–47