Amylior LOGO SILVER OutoHAIR, Руководство пользователя

Страница: 63 / 68

P·63
Fig. 23 Fig. 24
9.9. MALFUNCTION OF THE SEAT RECLINER
• Every month, check that the two seat tilt stoppers are in good condition and are in
contact when the seat is tilted to its maximum (Fig. 23).
• If this is not the case, contact your Logo Silver authorised dealer for adjustment or
replacement of the stoppers.
Seat tilt rear stoppers Front mounting of the seat tilt cylinder
9.10. STEERING-LOCK MALFUNCTION
If the steering lock is not effective enough you can adjust the cable tension by turning the
adjustment dial on the control.
If this adjustment of the cable tension does not allow the correct adjustment of the direction,
you must (Fig. 25):
• Loosen the lock-nut (1).
• Screw in the cylinder rod (2) for a decreased steering lock.
• Or unscrew the cylinder rod (2) for an increased steering lock.
• Tighten the lock nut (1) keeping the rod in the desired position.
WARNING !
Do not attempt to adjust and / or change these stoppers yourself as this
risks changing the maximum position of the seat recliner, potentially
causing the chair to tip over.