P·32
7.7.4. POWERING OFF
• Turn off the joystick
• The engine brakes must be engaged so that the wheelchair does not move.
• Do not leave the wheelchair stationary with flat batteries, this could affect the
autonomy of the wheelchair.
7.8. JOYSTICK CONTROLLER
Joystick controls can be customised and different models are available to suit the user’s needs.
7.8.1. JOYSTICK
The joystick is used to control the speed and direction of the wheelchair. Push the joystick
in the direction of travel, the further you push it, the faster you go.
When you release the joystick, the chair will automatically stop.
7.8.2. JOYSTICK POWER SUPPLY
If the power wheelchair does not move as expected, immediately release the joystick and
switch off the chair. Unless the joystick is damaged, the electric wheelchair will stop. If the
joystick is not in the neutral (central) position when you start the chair, this may cause the
system to malfunction. Release the joystick and restart the chair to reset the system.
7.8.3. RAIN AND WATER
The joystick housing is not waterproof. The joystick module is splash proof, but can be
irreparably damaged if water passes through the rubber seals (such damage is not covered by
the warranty).
7.8.4. JOYSTICK CABLE
If for any reason the joystick cable becomes unplugged, do not reconnect by force.
The plug is polarized and can only be inserted one way.
WARNING !
Always switch off the wheelchair when remaining still in order to
avoid any unexpected movement.
Содержание LOGO SILVER OutoHAIR
Страница 1: ...HIGH PERFORMANCE 4X4 POWER WHEELCHAIR Find this notice at www logo silver fr...
Страница 2: ...P 2...
Страница 67: ......