AMX VISUALARCHITECT 1.1, Руководство пользователя

Страница: 48 / 242

Working With the Device Database
36 VisualArchitect v1.1
CONFIDENTIAL AND PROPRIETARY. COPYRIGHT, AMX LLC, 2006
a.
Press and hold the button on the remote - the SIGNAL (red) LED on the IRIS should flicker to
indicate that is receiving a signal.
b. Don't release the button on the remote until the READY (green) turns off (approximately 3
seconds). When the READY LED turns off, the IRIS is ready to verify the signal (by repeating
the button press).
c.
When the VERIFY (red) and READY (green) LEDs are lit, press and hold the button again.
Again, hold the button until the READY LED turns off.
d.
Once the function has been captured and verified by the IRIS, the LED on the SEND button
(also on the front panel of the IRIS) illuminates to indicate that the captured function is ready to
send (to the PC).
e. Press the SEND button to send the captured function to the PC (so it can be added to the IRL file
for this device). The display on the IRIS reads "So", indicating that the function is being sent to
the PC.
The IR Code Capture and Management dialog should now indicate that it is waiting for you to
capture the next selected function (and that one less function remains to be captured).
Repeat steps a-f for the remaining functions, until all of the selected functions have been
captured.
A green check icon in the Functions list indicates which functions have been captured
successfully.
3. Once you have captured all of the selected functions, save your work: In the IR Code Capture and
Management dialog, select
File > Save . This creates an IR Capture File (*.IRL) in the specified
directory.
For best results, place the remote control's IR emitter as close as possible to the IR
window on the IRIS.
You can cancel the capture process at any time by clicking on the Cancel Capture
button.