AMX VISUALARCHITECT 1.1 Скачать руководство пользователя страница 210

Страница: 210 / 242

Appendix C: Using an IRIS IR Capture Unit

198

VisualArchitect v1.1

CONFIDENTIAL AND PROPRIETARY. COPYRIGHT, AMX LLC, 2006

IRIS - Display Characters and P Mode Settings

The following table lists the display characters and P mode settings for special remote controllers (RCs).

IRIS - Baud Rate Settings

The default communication setting for the IRIS unit is 9600 baud. You can change the baud rate with the
up, down, and send pushbuttons.

You must set the IRIS unit's baud rate to match the baud rate of the PC running Visual Architect to store
RC functions.

To set the baud rate:

Disconnect the power supply from the IRIS unit.

Press and hold the up, down, and send pushbuttons. Reconnect the power supply and release the
pushbuttons.

Default Mode Settings:

• Default

Setting

• Baud

9600

• P3

off

• P4

• P5

off

• P6

• P7

• P8

off

Display Characters and P Mode Settings

Characters Description

• [ ]

RC function is captured, analyzed, stored, and verified.

• Er

Error: RC function did not verify correctly.

• Nd

No Device. Communication device error detected, or the IRLIB program is not staged to
receive RC functions.

• NO

Normal Operation. Ready to capture RC.

• OF

P mode is off.

• On

P mode is on.

• So

Send OK. RC function sent without errors to a PC running IRLIB.

• SP

Special Function. Special mode to capture unusual RC functions.

• P1-P2

Not used.

• P3

Sends RC functions to a PC running IRLIB automatically after the VERIFY operation.

• P4

Disables the VERIFY operation to capture RC functions. Default mode requires the VERIFY
operation.

• P5

Loose-timing mode to capture JVC (PQ10956) RC functions.

• P6

Glitch-detection mode to capture Kinderman and some Mitsubishi RC functions.

• P7

Disables glitch-detection mode to capture non-carrier RC functions.

• P8

Strict-timing mode

The IRIS unit automatically sets the baud rate to 9600 when you connect power. If
you reset the baud to any other setting and disconnect power, the previous baud rate
setting is lost and the IRIS unit will default back to 9600 baud.

Содержание VISUALARCHITECT 1.1



















































































































































































































































Результаты поиска

Содержание VISUALARCHITECT 1.1

Отзывы:

Бренды по названию

Популярные бренды

AMX VISUALARCHITECT 1.1, Руководство пользователя

Результаты поиска

Содержание VISUALARCHITECT 1.1

Отзывы:

Бренды по названию

Популярные бренды