Wiring and Device Connections
25
Enova DVX-315xHD & DVX-215xHD All-in-One Presentation Switchers - Instruction Manual
Front Panel Controls and Indicators
The following sub-sections describe each component on the front panel of the DVX. Refer to FIG. 5 on page 22 for the component
layout of the front panel.
LEDs
The LEDs on the front panel indicate the communications status of several different connections, as described in the table below:
FIG. 13 displays the front panel LEDs for the 315x All-in-One Presentation Switchers:
FIG. 13
Front Panel - LEDs (315x models)
FIG. 14 displays the front panel LEDs for the 21xx All-in-One Presentation Switchers:
FIG. 14
Front Panel - LEDs (21xx models)
LCD Display
During normal operation, the 2 x 20 line LCD display indicates output volume information. The LCD backlight on the display turns
off after 35 seconds of inactivity.
FIG. 15 displays the LCD display.
FIG. 15
LCD display
Front Panel LEDs
Label
Color
Description
LINK/ACT
Green
Blinks when receiving LAN data packets.
STATUS
Green
Blinks to indicate that the system is programmed and communicating
properly.
INPUT
Yellow
Blinks to indicate that the Controller is receiving data.
OUTPUT
Red
Blinks to indicate that the Controller is transmitting data.
RS-232/422/485
Red/yellow
LEDs indicate that RS-232/422/485 Ports are transmitting or receiving
data.
Red = transmitting data
Yellow = receiving data
RELAYS
Red
Lights to indicate that one or more of the relay channels of the relay port
are currently active (closed).
IR/SERIAL
Red
Lights to indicate that one or more of the IR/Serial channels of the
IR/SERIAL ports are currently transmitting control data.
I/O
Yellow
Lights to indicate that one or more of the I/O channels of the I/O port are
currently active.
I/O
LEDs
IR/Serial
LEDs
Relay
LEDs
RS-232/422/485
Input LED
Status LED
LINK/ACT LED
Output LED
LEDs
I/O
LEDs
IR/Serial
LEDs
Relay
LEDs
RS-232/422/485
Input LED
Status LED
LINK/ACT LED
Output LED
LEDs