Enova 21xx All-in-One Presentation Switchers
18
Enova DVX-315xHD & DVX-215xHD All-in-One Presentation Switchers - Instruction Manual
Navigational
pushbuttons:
4 directional buttons for navigating the options in the Switch, Video, Audio, and Status menus (on
the LCD display).
STATUS pushbutton:
Press to access the STATUS menu on the LCD display on which you can view system status and
other system information.
EXIT pushbutton:
Press to exit the current menu and return to the default menu page, Main Amp Output/Volume.
VIDEO MUTE
pushbutton:
Press to mute/un-mute (enable/disable) all video output displays.
Video Mute results in a blank screen on the output displays.
AUDIO MUTE
pushbutton:
Press to mute/un-mute all audio outputs.
Rear Panel Components:
RS-232/422/485 (PORT
1-3):
RS-232/422/485 Ports 1-3 provide serial control via DB9 (male) connectors.
See the
RS232/422/485 Serial Port Connectors
section on page 38 for more information.
RELAYS (PORT 4):
1 relay port (Port 4) provides Relay control via 8-pin 3.5 mm captive-wire connectors.
See the
section on page 39 for more information.
IR/SERIAL
(PORTS 5-8):
4 IR/Serial ports (Ports 5-8) provide IR/Serial control via 2-pin 3.5 mm captive-wire connectors.
See the
section on page 40 for more information.
I/O (PORT 9):
Port 9 provides an 8-channel binary I/O port for contact closure with each input being capable of
voltage sensing.
See the
section on page 39 for more information.
AUDIO INPUTS:
8 analog audio inputs:
• 2 female 1/8" stereo mini-phono jacks receive up to two unbalanced line-level audio inputs. See
the
section on page 28 for more information.
• 2 3.5mm 5-pin captive-wire connector provides for fixed or variable, balanced or unbalanced line-
level audio inputs. See the
section on page 29 for more information.
MIC INPUTS:
2 3.5mm 3-pin captive-wire connectors receive up to 2 mono microphones (balanced or unbalanced
audio and switchable Phantom Power). See the
section on page 30 for more
information.
AMP OUT:
• AMP: 4-position captive wire connector provides amplified audio output with volume control (-SP
models only).
• AMP: Two 2-position captive wire connectors provide 70V or 100V mono amplified audio output
(-T models only).
section on page 31 for more information.
AUDIO OUTPUTS:
2 3.5mm 5-pin captive-wire connector provides for balanced or unbalanced, mono or stereo line-
level audio output.
See the
section on page 31 for more information.
S/PDIF OUTPUT:
1 Coaxial RCA connector provides digital S/PDIF audio output that can mirror any of the 3 analog
audio outputs, 2 HDMI outputs, or DXLink output.
MULTI FORMAT VIDEO
INPUTS:
2 DVI-I input connectors provide analog and digital video inputs for up to two video sources.
Each MULTI FORMAT VIDEO INPUT connector supports VGA, S-Video, composite video, component
video, DVI, or HDMI video input. See the
Available Pixel Display and Refresh Rates
page 110 for information on supported video formats and resolutions. See the
section on page 45 for information about wiring conversion cables.
Rear Panel Components: (Cont.)
HDMI INPUTS:
• 4 HDMI inputs (3-6) receive digital audio and video from up to four video sources. (DVX-2150HD
only)
• 2 HDMI inputs (3-4) receive digital audio and video from up to two video sources. (DVX-2155HD
and DVX-2110HD only)
All HDMI inputs are HDCP compatible. See the
section on page 34 for more
information.
DXLINK INPUTS:
2 RJ-45 inputs (5-6) provide support for digital video, audio, Ethernet, bi-directional control and
power over Category Cable from any DXLink transmitter (DVX-2155HD and DVX-2110HD only). See
section on page 35 for more information.
VIDEO OUTPUTS:
• 2 HDMI Output connectors (1-2) each provide HDMI digital audio and video output.
• 1 DXLink RJ-45 output (3) provides digital video, audio, Ethernet, and bi-directional control over
Twisted Pair Cable to DXLink Receivers. (On the DVX-2110HD, the DXLink output mirrors HDMI
port 1.)
section on page 35 for more information and important cable
recommendations.
Continued
DVX-2150HD/2155HD/2110HD Specifications
