AMX DVX-2150HD-T (FG1905-13) Скачать руководство пользователя

Страница: 27 / 116

Wiring and Device Connections

Enova DVX-315xHD & DVX-215xHD All-in-One Presentation Switchers - Instruction Manual

Navigation Pushbuttons

The four directional navigation buttons (Left/Right/Up/Down) enable you to navigate through and adjust the configurable

parameters shown on the LCD display. The UP and DOWN navigation buttons are used to move between configurable parameters

within a menu. Pressing UP takes you to the previous configuration parameter. Pressing DOWN takes you to the next configuration

parameter. These buttons do not change the currently selected menu.
The LEFT and RIGHT navigation buttons are used to change the setting of the displayed parameter. If the parameter is read-only

the value cannot change. Pressing LEFT decreases the value displayed if the setting is numeric, or goes to the previously set item if

the setting is a set selection. Pressing RIGHT increases the value displayed if the setting is numeric, or goes to the next set item if

the setting is a set selection. These buttons do not change the currently selected menu.
FIG. 20 displays the Navigation pushbuttons.

FIG. 20

Navigation Pushbuttons

STATUS Pushbutton

Press the STATUS pushbutton to access the STATUS menu on the LCD display.
FIG. 21 displays the STATUS pushbutton.

FIG. 21

STATUS Pushbutton

The STATUS menu enables you to see status information such as IP address and installed firmware versions as well as adjust LCD

and LED backlight intensity.



Use the UP and DOWN navigational buttons to traverse the various options.



Use the LEFT and RIGHT navigational buttons to adjust the selected LCD and LED backlight intensity (when selected).

Adjustments take effect immediately and are saved when you advance to another option or exit the menu. The menu exits

automatically after no user interaction on the front panel for 30 seconds.
See the

Status Menu

section on page 57 for a listing of all available options and instructions on how to change the settings.

EXIT Pushbutton

Press the EXIT pushbutton (FIG. 22) to exit any menu on the LCD display.
FIG. 22 displays the EXIT pushbutton.

FIG. 22

EXIT Pushbutton

Содержание DVX-2150HD-T (FG1905-13)





















































































































Результаты поиска

Содержание DVX-2150HD-T (FG1905-13)

Отзывы:

Похожие инструкции для DVX-2150HD-T (FG1905-13)

Бренды по названию

Популярные бренды

AMX DVX-2150HD-T (FG1905-13), Инструкция по эксплуатации

Результаты поиска

Содержание DVX-2150HD-T (FG1905-13)

Отзывы:

Похожие инструкции для DVX-2150HD-T (FG1905-13)

Бренды по названию

Популярные бренды