AMX DVX-2150HD-T (FG1905-13) Скачать руководство пользователя

Страница: 61 / 116

Audio/Video Configuration

Enova DVX-315xHD & DVX-215xHD All-in-One Presentation Switchers - Instruction Manual

Perform these steps to access the configuration settings:
1.

Open a web browser.

Enter the IP address of the All-In-One Presentation Switcher in the location bar of the web browser. (If you do not know your

switcher’s IP address, see the

Locating the IP Address of the DVX

section on page 60.) The Main WebControl page opens

(FIG. 64).

NOTE:

WebControl requires that you install the latest version of the Adobe Flash Player plug-in for your browser. If your browser does

not have the Flash Player plug-in installed, you will be prompted to install it.

Use the Device options menu at the top of the screen to select the <DEVICE #> - DVX-315xHD-x Switch Device. (Substitute

the model number of your unit for x.) The Enova DVX Setup page opens (FIG. 66).
If a web browser or Flash Player is not available, the All-In-One Presentation Switcher's front panel and NetLinx commands

provide equivalent controls for audio/video configuration. See the

Using the Front Panel Buttons

section on page 52 for more

information.

Locating the IP Address of the DVX

Locate the IP address of the DVX by using the buttons on the front panel of the unit. The IP address appears on the LCD display on

the front panel of the DVX. Perform these steps to locate the IP address of the unit:
1.

Press the

STATUS

button on the front panel of the unit. The Status menu appears on the LCD display.

Use the

and

DOWN

navigational arrow buttons to navigate through the options until you locate the All-In-One

Presentation Switcher’s IP address. Note the IP address for future reference.

NOTE:

You can use the Status Menu to verify current TCP/IP settings using the UP and DOWN navigational buttons.

General Options

The WebConsole Configuration page contains settings that are accessible from each tab. FIG. 65 indicates the universally

accessible options available on the web pages.

FIG. 65

WebConsole Configuration Page

NOTE:

The number of available video and audio inputs and outputs vary depending upon which DVX model you are configuring.

The following table lists the general options for the WebConsole Configuration page:

General Options

Mute

Turns off the audio for the device.

Amp Volume

Sets the output volume.

Refresh

Click to reload all settings.

Reset to Defaults

Click to reset the current page’s settings to its factory default.

Amp Volume and Mute

Refresh

Reset to Defaults

Содержание DVX-2150HD-T (FG1905-13)





















































































































Результаты поиска

Содержание DVX-2150HD-T (FG1905-13)

Отзывы:

Похожие инструкции для DVX-2150HD-T (FG1905-13)

Бренды по названию

Популярные бренды

AMX DVX-2150HD-T (FG1905-13), Инструкция по эксплуатации

Результаты поиска

Содержание DVX-2150HD-T (FG1905-13)

Отзывы:

Похожие инструкции для DVX-2150HD-T (FG1905-13)

Бренды по названию

Популярные бренды