Enova 315x All-in-One Presentation Switchers
16
Enova DVX-315xHD & DVX-215xHD All-in-One Presentation Switchers - Instruction Manual
PROGRAM Port:
DB9 connector (male) connects to a DB9 serial port on a PC, for serial communication. This connection is
used to configure system settings.
NOTE:
This port is not recommended for firmware updates or large file transfers. Any large data-
intensive operations are better handled via Ethernet.
See the
section on page 42 for more information.
ID Pushbutton:
Black ID pushbutton sets the NetLinx Device ID assignments of the Internal Control Device. See the
section on page 42 for more information.
LAN Port:
RJ-45 connector provides TCP/IP communication. See the
section on page 42 for more
information.
AxLink Port:
1 3.5 mm 4-pin captive-wire connector provides data and power to external control devices. The AxLink
LED (green) indicates the state of the AxLink port. The AxLink port can be used to supply power to
downstream AxLink-compatible devices as long as the maximum current draw is less than 1 Amp.
NOTE:
The AxLink port provides only limited power to connected AxLink devices. It is recommended to
use an alternate power source when connecting AxLink devices to the DVX.
NOTE:
When using the DVX with the NXA-PDU-1508-8 power distribution unit, do NOT c12V
power from any of the NXA-PDU's AxLink ports to the AxLink power pin.
See the
AxLink Port and LED (4-pin captive-wire)
section on page 43 for more information.
Power Connector:
IEC Power cord connector: 100-240V AC, 47-63Hz
Operating Environment:
• Storage temperature: -10º C to 70º C (14º F to 158º F)
• Operating Temperature: 0º C to 40º C (32º F to 104º F)
• Operating Relative Humidity: 5% to 85% non-condensing
Supported Video
Resolutions:
HD resolutions up to 1080p and RGB resolutions up to 1920x1200@60Hz. Higher resolutions are
supported in pass-through mode. See the
Available Pixel Display and Refresh Rates
a complete listing of all supported video resolutions.
Dimensions (HWD):
5 3/16" x 17" x 14" (13.2 cm x 43.2 cm x 35.6 cm)
Weight:
18.2 lb (8.26 kg)
Enclosure:
Metal with black matte finish
Certifications:
• FCC Part 15 Class A
• IC CISPR 22 Class A
• C-Tick CISPR 22 Class A
• CE EN 55022 Class A and EN 55024
• LVD EN 60950-1
• IEC 60950-1
• cULus UL 60950-1
Included Accessories:
• 1 Power Cord, Universal
• 2 Connector, Phoenix2, M, TH, R/A, BLACK, 5.08mm
• 7 Connector, Phoenix5, F, BLACK
• 2 Connector, Phoenix3, F, BLACK
• 1 Commoning Strip, Cypher, 8 Pos., 3.5 mm, Phoenix Connector
• 1 Connector, Phoenix4, F, TH, BLACK, 3.5mm
• 2 Connector, Phoenix, 8-pin, FEM, BLACK
• 1 Connector, Phoenix, 10-pin, FEM, BLACK
• 2 Front Rack Mounting Brackets
• 8 Screw, #8-32 x .375, PFH, Undercut, BLACK
• 2 CC-NIRC, IR Emitter with 3.5mm Phoenix Connector (
FG10-000-11
)
• 1 CC-DVIM-VGAF, DVI to HD-15 Female Adapter (
FG10-2170-13
)
Optional Accessories:
• CC-DVI-5BNCM DVI to 5 BNC adapter cable (
FG10-2170-08
)
• CC-DVI-RCA3M DVI to 3 Male RCA adapter cable for component and composite connections (
FG10-
2170-09
)
• CC-DVI-SVID DVI to S-Video adapter cable (
FG10-2170-10
)
• CC-DVIM-VGAF DVI to HD15 female adapter cable (
FG10-2170-13
)
• CC-3.5ST5-RCA2F 2 RCA Female to 5-Pin Phoenix Cable (
FG10-003-20
)
• AVB-RX-DXLINK-HDMI DXLink™ HDMI Receiver Module (
FG1010-500
)
• AVB-TX-HDMI-DXLINK DXLink HDMI Transmitter Module (
FG1010-300
)
• AVB-TX-MULTI-DXLINK DXLink Multi-Format Transmitters (
FG1010-310
)
• AVB-WP-TX-MULTI-DXLINK DXLink Multi-Format Wallplate Transmitters
(
FG1010-320-BL/WH
)
DVX-3150HD/3155HD/3156HD Specifications
