Audio/Video Configuration
64
Enova DVX-315xHD & DVX-215xHD All-in-One Presentation Switchers - Instruction Manual
Audio Settings
The Audio page enables you to set the audio qualities for each audio input, microphone input, amplifier output, and line output.
Any changes you make reflect instantaneously on your source input and output devices.
Audio Out
FIG. 68 displays the Audio Out page for the DVX.
FIG. 68
WebConsole Configuration Page - Audio Out Tab
1 -
Analog Output
: Select the corresponding option button to select an audio output to adjust. You can only select one audio
output at a time.
Click the Track Output 1 check box to track the amp volume for Output 1.
This option is only available for outputs 2, 3, and 4.
2 -
Output Volume
: Use the sliders to set the output levels for the selected audio output. You can set the following options for
each audio output:
Output Volume
: Use the slider to set the volume of the selected audio output. You can set the volume from 0 to 100. The
default setting is 20.
Min/Max
: Use the sliders to adjust the minimum and maximum volume of the audio output. There are separate sliders on this
option for minimum and maximum volume. You can set the maximum volume from 0 to 100 in increments of 1. The default
value is 100. You can set the minimum volume from 0 to 100 in increments of 1. The default value is 0.
Balance
: Use the slider to adjust the balance level of the selected audio output. You can set the balance level from -20 to
+20. The default value is 0.
Sync Delay
: Use the slider to set the number of milliseconds to delay the audio. The default value is 32. Additionally, you can
silence the audio output by clicking the Mute check box.
3 -
HDMI Output
: Use the available options to configure the HDMI output.
HDMI Output
: Select the HDMI output for which you want to adjust the audio options.
Audio Source
: Select the audio stream to output through the selected HDMI output. You can choose from Input Pass-thru or
any of the four available Analog Outputs.
Apply EQ
: Click the check box to toggle whether the volume and equalizer for the HDMI source port is active.
4 -
S/PDIF Output
: Select the audio stream to output through the S/PDIF output. You can choose from any of the available
HDMI or Analog Outputs.
5 -
Select Input
: Use the menu to switch the audio input to the selected audio output.
6 -
Output Format
: Use the menu to change the audio format of the selected audio output. You can set the audio format to
Stereo or Mono. The default setting is Stereo.
7 -
Tone Generator
: The tone generator provides an internally generated audible tone. The selected tone overrides any input
source selection. Selecting 'Off' removes the override, allowing you to hear audio from the selected source. You can choose
from Off, 60Hz, 250Hz, 400Hz, 1kHz, 3kHz, 5kHz, 10kHz, Pink Noise, and White Noise.
1
4
5
6
9
10
2
3
8
7
8