Enova 21xx All-in-One Presentation Switchers
19
Enova DVX-315xHD & DVX-215xHD All-in-One Presentation Switchers - Instruction Manual
CONFIG DIP Switch:
8-position Master configuration DIP switch allows setting the Serial Programming port baud rate
and on-board Master execution mode (PRD or normal). See the
section on page 41 for more information.
PROGRAM Port:
DB9 connector (male) connects to a DB9 serial port on a PC, for serial communication. This
connection is used to configure system settings.
NOTE:
This port is not recommended for firmware updates or large file transfers. Any large
data-intensive operations are better handled via Ethernet.
section on page 42 for more information.
ID Pushbutton:
Black ID pushbutton sets the NetLinx Device ID assignments of the Internal Control Device. See the
section on page 42 for more information.
LAN Port:
RJ-45 connector provides TCP/IP communication. See the
section on page 42 for more
information.
AxLink Port:
1 3.5 mm, 4-pin captive-wire connector provides data and power to external control devices. The
AxLink LED (green) indicates the state of the AxLink port used to supply power to downstream
AxLink-compatible devices as long as the maximum current draw is less than 1 Amp.
NOTE:
The AxLink port provides only limited power to connected AxLink devices. It is
recommended to use an alternate power source when connecting AxLink devices to the DVX.
NOTE:
When using the DVX with the NXA-PDU-1508-8 power distribution unit, do NOT connect
+12V power from any of the NXA-PDU's AxLink ports to the AxLink power pin.
AxLink Port and LED (4-pin captive-wire)
section on page 43 for more information.
Power Connector:
IEC Power cord connector: 100-240V AC, 47-63Hz
Operating Environment:
• Storage temperature: -10º C to 70º C (14º F to 158º F)
• Operating Temperature: 0º C to 40º C (32º F to 104º F)
• Operating Relative Humidity: 5% to 85% non-condensing
Supported Video
Resolutions:
HD resolutions up to 1080p and RGB resolutions up to 1920x1200@60Hz. Higher resolutions are
supported in pass-through mode. See the
Available Pixel Display and Refresh Rates
page 110 for a complete listing of all supported video resolutions.
Dimensions (HWD):
5 3/16" x 17" x 14" (13.2 cm x 43.2 cm x 35.6 cm)
Weight:
• DVX-2150HD/DVX-2155HD: 18.3 lbs (8.31 kg)
• DVX-2110HD-SP: 17 lbs (7.7 kg)
• DVX-2110HD-T: 21 lbs (9.5 kg)
Enclosure:
Metal with black matte finish
Certifications:
• FCC Part 15 Class A
• IC CISPR 22 Class A
• C-Tick CISPR 22 Class A
• CE EN 55022 Class A and EN 55024
• LVD EN 60950-1
• IEC 60950-1
• cULus UL 60950-1
Included Accessories:
• 1 Power Cord, Universal
• 2 Connector, Phoenix2, M, TH, R/A, BLACK, 5.08mm
• 7 Connector, Phoenix5, F, BLACK
• 2 Connector, Phoenix3, F, BLACK
• 1 Commoning Strip, Cypher, 8 Pos., 3.5 mm, Phoenix Connector
• 1 Connector, Phoenix4, F, TH, BLACK, 3.5mm
• 2 Connector, Phoenix, 8-pin, FEM, BLACK
• 1 Connector, Phoenix, 10-pin, FEM, BLACK
• 2 Front Rack Mounting Brackets
• 8 Screw, #8-32 x .375, PFH, Undercut, BLACK
• 2 CC-NIRC, IR Emitter with 3.5mm Phoenix Connector (
FG10-000-11
)
• 1 CC-DVIM-VGAF, DVI to HD-15 Female Adapter (
FG10-2170-13
)
Continued
DVX-2150HD/2155HD/2110HD Specifications
