Advanced Functions - DAS-MET-6SRC
56
Metreau Keypads
Working With Alarms
To use the Alarm feature, a System Time must first be entered on the Main Controller, via the Front
LCD.
To set an alarm from each Keypad, select a Source, adjust the volume, and set the alarm time (using
24HR clock, as described below).
When the alarm time is reached, the Source selected will turn On, and the volume will ramp up to the set
volume and begin playing. At this point the source will behave normally.
Setting the System Clock on the Tango Audio Controller
From the LCD on the front panel of the Tango Audio Controller:
1.
Select
CLOCK
2.
Select
Set Time
to display the following screen (FIG. 14):
3.
Press
Hour
to increment the HH (hours) from 1 through 24.
4.
Press
Minute
to increment the MM (minutes) from 01 through 60.
5.
Press
Second
to increment the SS (seconds) from 01 through 60.
6.
Press
Set
to set the clock to the time displayed.
Refer to the
Tango Audio Controller Operation/Reference Guide
for details.
If a Favorite has been set, the Favorite will begin playing. Otherwise, the last station/
CD will begin playing.
FIG. 14
Setting the System Clock on the Tango Audio Controller
Содержание DAS-MET-NUM
