AMX DAS-MET-NUM Скачать руководство пользователя страница 80 | Manualshive

Страница: 80 / 92

AMX DAS-MET-NUM Скачать руководство пользователя страница 80

Using the NetLinx Module

72

Metreau Keypads

Satellite

Touch

Satellite

to invoke the Device Control page shown in FIG. 28:

The options on this page include:

FIG. 32

Device Control page - Satellite

Device Control Page - Satellite

Display Window:

Displays the current Channel, Category and Song info.

Channel Up/Down:

Press the Up and Down arrow buttons to browse up/down in the selected
Category.

Guide Up/Down:

Press the Up and Down arrow buttons to browse up/down through the
Guide.

Keypad:

Use the keypad button for direct tuning. Press enter to tune to the specified
channel.

Presets:

Use the Presets buttons to recall up to ten station presets.

Zone Options:

Press to access the Zone Options popup for configuring audio settings for the
selected Location (Zone). Note that the currently selected Location is indicated
in the upper-right corner of the page (see the

Zone Options

section on

page 65).

Change Source:

Press to access the Sources page for this location. Note that the currently
selected Source is indicated in the upper-left corner of the page (see the

Change Source

section on page 66).

Mute:

Press to mute the audio.

Volume Up/Down:

Press the Up and Down arrow buttons to adjust the volume up/down.

Power On/Off:

Press to toggle the Source device Off/On, in this Zone only. The source device
will continue playback in other Zones.

Display window

Channel Up/Down

Mute

Volume Up

Volume Down

Tuner Presets 1-10

(current Channel/

Category/Song info)

Guide Up/Down

Go to Channel Guide

Source On/Off
(this Zone only)

Numeric keypad for direct tuning
(press Enter to select
specified station)

«
...
78
79
80
81
82
...
»

Содержание DAS-MET-NUM





























































































Отзывы:

Нет отзывов