AMX DAS-MET-NUM Скачать руководство пользователя

Страница: 15 / 92

Metreau™ Keypads

Metreau Keypads

DAS-MET-6SRC Metreau 6-Source Audio Keypad

The DAS-MET-6SRC 6-button keypad (FIG. 3) features source control, visual volume feedback and a
navigation wheel that adjusts volume and provides up, down, left, right and center button options (see the

Basic Keypad Functions - DAS-MET-6SRC

section on page 33 for information).

The DAS-MET-6SRC is a SWT keypad, suitable for use in Matrix Distributed Audio Systems.

DAS-MET-6SRC Specifications

MET-13 Specifications (Cont.)

Operating
Environment:

• Operating Temperature: 32° - 104° F (0°- 40° C).
• Relative Humidity: 5% - 85%, non-condensing.
• Intended for indoor use only.

Certifications:

• FCC Class B
• CE
• IEC60950
• RoHS

Colors:

• White (FG5794-02-WH)
• Black (FG5794-02-BL)
• Light Almond (FG5794-02-LA)

Optional
Accessories:

• Single Button Kit (FG5794-10)
• Double Button Kit (FG5794-11)
• Lutron Cairo Wallplates (available in a variety of sizes and colors)

FIG. 7

DAS-MET-6SRC Metreau 6-Source Audio keypad (Light Almond shown)

DAS-MET-6SRC Specifications

Power:

12 VDC, 125 mA

Front Panel
Components:

• Pushbuttons - 6 tactile pushbuttons with blue LED indicators that illuminate when the

source is selected, and stay lit until the source is turned off. These pre-printed buttons
are field-replaceable.

• IR Sensor - Works specifically with the MIO-R1-AUDIO remote controller (38 kHz only).

IR Sensor located here

Navigation Wheel

6 pre-printed pushbuttons
(with blue LED indicators)

Volume Level Indicator LEDs

Содержание DAS-MET-NUM





























































































Результаты поиска

Содержание DAS-MET-NUM

Отзывы:

Похожие инструкции для DAS-MET-NUM

Бренды по названию

Популярные бренды

AMX DAS-MET-NUM, Руководство по эксплуатации/справочник

Результаты поиска

Содержание DAS-MET-NUM

Отзывы:

Похожие инструкции для DAS-MET-NUM

Бренды по названию

Популярные бренды