background image

Advanced Functions - DAS-MET-6SRC

59

 Metreau Keypads 

Keypad Lockout

Keypad Lockout

 functionality allows the user to lock any keypad from any other keypad in the system.

For example, if the user wants to lock the keypad in their rooms, the user can access the lockout feature 
from any keypad in the house. Once the keypads are locked the children can no longer control the system 
from the keypad in their rooms.

If the user wants to lockout a keypad’s ability to control the system, it can be setup from any keypad in 
any zone that has a DAS-MET-NUM keypad installed.

Locking a Keypad 

1.

Press and hold buttons 

7 and 8

 simultaneously for four seconds (Source LED’s turn On).

2.

Enter the 

Zone number

 to Lock.

3.

Press 

ENTER

 to complete (Source LED’s turn Off).

Examples: 

 

Press and hold 

7 and 8

 (for 4 seconds) + 

2

 + 

ENTER

 = keypad in zone #2 will be locked.

 

Press and hold 

7 and 8

 (for 4 seconds) + 

4

 + 

ENTER

 = keypad in zones #2 & #4 will be 

locked.

FIG. 18  

Locking A Keypad

Press and hold buttons 

7 & 8

 

Press 

ENTER

 to save

Enter the Zone number

that you want to lock

simultaneously for 4 seconds
to access Lockout mode

You may not lockout the same keypad that you have accessed to setup the Keypad 
Lockout feature (so that the keypad that is accessing the lockout feature cannot 
lockout itself).

Содержание DAS-MET-NUM





























































































Отзывы: