AMX DAS-MET-NUM Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 92

AMX DAS-MET-NUM Скачать руководство пользователя страница 11

Metreau™ Keypads

3

Metreau Keypads

MET-6N Metreau 6-Button Keypad with Navigation

The MET-6N 6-button keypad features source control, visual volume feedback and a navigation wheel
that adjusts volume and provides up, down, left, right and center button options (FIG. 3).

The MET-6N is an AxLink keypad, suitable for use in NetLinx Control Systems.

MET-6N Specifications

FIG. 3

MET-6N Metreau 6-Button keypad with Navigation (Light Almond shown)

MET-6N Specifications

Power:

12 VDC, 75 mA

Front Panel
Components:

• Pushbuttons - 6 tactile pushbuttons with blue LED indicators that illuminate when

pressed to confirm the source/function was selected and that it is currently being used.
These pre-printed buttons are field-replaceable.

• IR Sensor - Supports standard AMX IR (38 kHz only).
• LED Levels Indicator - set of 7 blue LEDs provide level feedback.
• Navigation Wheel - consists of 5 pushbuttons: 4 directional pushbuttons (Up, Down,

Right, Left), 1 center pushbutton, and bi-directional rotating wheel for channel
adjustments.

• The Navigation wheel itself provides two button functions as well

(rotate CW = button #12, and rotate CCW = button #13, as indicated in FIG. 4).

Rear Panel
Components:

• DIP switch - 8 position mini DIP switch used to set the device address for the keypad

on the AxLink Bus (1-255).

• AxLink connector - 4 pin 3.5mm Phoenix connector for AxLink connection to the

NetLinx Master.

Dimensions (HWD): • Keypad and Mounting Plate: 4.055" x 1.772" x 0.997"

(103mm x 45mm x 25.32mm)

• Mounts into standard decora-style wall plates.

Weight:

2.4 oz. (68.04 g)

Operating
Environment:

• Operating Temperature: 32° - 104° F (0°- 40° C).
• Relative Humidity: 5% - 85%, non-condensing.
• Intended for indoor use only.

IR Sensor located here

LED Levels Indicator

Navigation Wheel

6 pre-printed pushbuttons
(with blue LED indicators)

(supports AMX IR 38kHz)

1

2

3

4

5

6

10

9

11

7

8

CW rotation = 12

CCW rotation = 13

Center (push/release)

Center (press/hold)

«
...
9
10
11
12
13
...
»

Содержание DAS-MET-NUM





























































































Отзывы:

Нет отзывов