Ametek Dycor Dymaxion Mass Spectrometer, Руководство пользователя

Страница: 112 / 128

Appendix B-10 | Dycor Dymaxion Mass Spectrometer
• Click the
I/O Setup
tab for each module position, enter the
Type
and
Name
(see example below).
Older I/O systems had a single digital input or output per module.
The SNAP I/O system combines four inputs or outputs into one
module. For the SNAP I/O system, the System 2000 module number
refers to a particular digital I/O channel, not the physical module.
For example, if a single digital output module is installed in the first
SNAP rack position, the System 2000 will refer to it as Modules 0, 1,
2 and 3. See Figure 2 – B3000 I/O Mapping and Example.
Add Display for Digital Module
NOTE

• To create displays so that you can view the data being monitored, go to the
mode display where you want your information viewed. Right-click on one
of the screens.
• Click Scan .
• Click Device and select your digital device.