AmeriWater Heatsan 00HS208, Руководство по эксплуатации и техническому обслуживанию

Страница: 8 / 80

7
98-0156 Rev G
Bringing the system to a stop in the event of an emergency
To shut the unit down in the event of an emergency rotate the
yellow/red door isolator switch to the “OFF” position. Isolate the 3-
phase electrical supply to the unit at source. There will be no
requirement to isolate any of the hydraulic lines as all valves close
when de-energised.
Safety information for maintenance tasks
The owner of the unit must take care to ensure that only authorized
personnel who have been sufficiently informed for the task at hand
perform all maintenance and inspection tasks.
Before beginning tasks on the electrical equipment of the system, a
check must confirm that power has been disconnected. In addition, the
system must be secured to prevent it from being turned on again
unintentionally. The isolator switch is capable of accepting a lock-out
padlock when in its “OFF” position. The unit may contain water at
scalding temperatures; ensure it is drained down and safe to work on
before carrying out any maintenance tasks.
Disposing of system parts and operating materials
Refer to Section 10.1 for details.
Unauthorized conversion and manufacturing replacement
parts
Conversion or modification of the system is only permitted with the
approval of AmeriWater. Original replacement parts authorized /
supplied by the manufacturer enhance safety and ensure design
performance. The use of unauthorized parts may void the warranty on
the unit, impair its performance or compromise the safety of those
operating it.