AmeriWater Heatsan 00HS208, Руководство по эксплуатации и техническому обслуживанию

Страница: 5 / 80

4
98-0156 Rev G
2 HEALTH AND SAFETY
These instructions provide information on safe working practices. These
should be adopted to ensure safe and continuing operation of the
equipment. The manual should be read and understood before the
equipment is used.
AmeriWater reserves the right to make engineering refinements to the
equipment that may not be described herein. Any questions that cannot
be answered specifically by these instructions should be addressed to
AmeriWater or their agents for a response.
AmeriWater will not accept any responsibility for any equipment supplied
or the actions of such equipment or associated system if un-authorized
modifications are carried out that are considered by AmeriWater to
compromise the integrity of the original design philosophy.
If the unit’s performance becomes impaired and any remedial work
appears to be outside the scope of this manual, then seek advice from
AmeriWater, quoting the unit’s serial number (Refer to Section 1 Contact
Details).
The unit must not be disassembled in any way unless carried out by an
AmeriWater technician or authorized trained personnel.
During normal operation, the unit must not be operated with the control
panel door open. If access is required to the control panel, always isolate
the power supply using the door isolator.
The
‘Caution’ symbol is used throughout this manual to highlight where
particular care must be taken to ensure the safety of the operator, and
the protection provided by the equipment, is not impaired.