30
98-0156 Rev G
Pressing
“LOOP SIZE”
will take you to
the
LOOP SIZE
screen. There is the
option of defining the loop as small
medium, or large. This loop size
designation will tell the program how
many heaters need to kick on during
the Hold Period to maintain
temperature.
To enter the
FACTORY SETUP
screens
press
“NEXT PAGE”
. This will take you
into the six factory setup screen menus
as follows.
NB:
Changing any default value will
affect the operation of the unit; always
refer to AmeriWater before changing
any values.
The unit will already have been
programmed with a set of factory
default values. Details of these can be
found in Section 6.10. To change any
values simply press the relevant digit, a
number keypad will be displayed,
select the desired value and press
“ENTER”.
MAXIMUM OPERATING TEMP
is the
temperature that the “Over
Temperature” Alarm will appear.
MAXIMUM SERVICE TEMP
is the
temperature that the Cool Down
Period ends at.
MINIMUM HOLD TIME
sets the
minimum time for the hold period.
Press “
NEXT PAGE
” to enter
FACTORY
SETUP PAGE 2
.
Содержание Heatsan 00HS208
