AMERITECH AM8a, Инструкция по эксплуатации

Страница: 59 / 152

Analysis Parameters (18-0037) AM8a Instruction Manual
February 10, 2000 0037-S04.L_
4-4
4.6 PULSE ANALYZE 1
This is the first of two menus used for
PULSE
dial analysis. This menu contains parameters
for the speed and percent of break time analysis.
PULSE :
ANALYZE 1:
SPEEDpps(min/max)
8.0 12.0
5 to 25 (0.1pps steps)
BREAK%
50 70
20 to 85 (1% steps) Alternate:
NOTE:
The
OFF HOOK
vdc parameter described in 4.11.2 will also affect the
ability to detect
PULSE
dial digits.
4.6.1
SPEEDpps(min/max):
When pulse dialing is received, the
SPEED
(pulses per second)
must fall within the min and max range programmed here. If the
SPEED
falls outside
this range, the Event is flagged as an error.
4.6.2
BREAK%:
When pulse dialing is received, the
BREAK %
must fall within the min and
max range programmed here. If the
% BREAK
falls outside this range, the Event is
flagged as an error.
4.7 PULSE ANALYZE 2
This is the second of two menus used for
PULSE
dial analysis. This menu contains parameters
for the interdigit time analysis.
PULSE :
ANALYZE 2:
INTRDIGITms(min)
300
120 to 999 (1ms steps) Alternate:
4.7.1
INTERDIGITms(min):
When
PULSE
dialing is received, the
INTERDIGIT
time must fall
within this parameter. If the time falls outside this range, the Event is flagged as an
error.