AMERITECH AM8a, Инструкция по эксплуатации

Страница: 58 / 152

AM8a Instruction Manual (18-0037) Analysis Parameters
0037-S04.L_32 February 10, 2000
4-3
4.4 DLY STRT (DELAY START) ANALYZE
When the
EXPECTED TYPE
of Start Signal is set to dialtone/delay, these parameters control
what is reported as an exception. If dialtone is received, these settings are not used.
DLY STRT:
ANALYZE: STRT BGNms(min/max)
0 300
0 to 999 (1ms steps)
ENDms(min)
140
0 to 9999 (1ms steps) Alternate:
4.4.1
STRT BGNms(min/max):
This is the time from off hook to the
DELAY
dial
START
SIGNAL
. If the timing is outside the range, it is flagged as an exception.
4.4.2
ENDms(min):
This time must be exceeded in order for the delay signal to be valid. A
delay signal shorter than this time will be flagged as an exception.
4.5 WINK STRT
When the
EXPECTED TYPE
of Start Signal is set to dialtone/wink, these parameters control
what is reported as an exception. If dialtone is received, these settings are not used.
WINK STRT:
ANALYZE : WINK BGNms(min)
15
15 to 999 (1ms steps)
DURms(min/max)
140 290
50 to 999 (1ms steps)
Alternate:
4.5.1
WINK BGNms(min):
This is the time from off hook to the
WINK START SIGNAL
. If the
timing exceeds this parameter, it is flagged as an exception.
4.5.2
DURms(min/max):
This is the time the wink signal must be present to be valid. A wink
signal less than the minimum (min) time or greater than the maximum (max) time of
this setting will be reported as an exception.