AmeriGlide STRATOS VPL, Инструкция по установке и обслуживанию

Страница: 43 / 44

STRATOS WITH ENCLOSURE:
Install Manual
25MAR2022 | 630-00147 C
43
MAINTENANCE
STRATOS WITH ENCLOSURE: SECTION 7
•
All doors and gates are locked and secure.
• Check for standing water around the unit.
•
Make sure AC connections are in good
condition and that there are no cracks or gaps
in conduit.
• Make sure there are no obstructions intruding
in the path of the lift.
−
People, tree branches, loose items, etc.
• Check that there is no loose hardware or
emerging cracks/deformations in the platform
and tower.
OWNER/OWNER’S AGENT
•
Check and ensure that the safety pan (if
equipped) under the platform moves freely
up and down and is not damaged. This is
the built-in safety device designed to detect
obstructions under the platform and stop
platform downward motion. If there is an
easy-to-remove obstruction, please remove it.
If for any reason the safety pan does not move
as intended, please contact Ameriglide Tech
services.
•
Check and ensure that all labels are intact and
legible. If any safety or warning labels need to
be replaced, please contact Ameriglide Tech
services.
• Check the pit switch is functioning properly.
Trigger the pit switch, exit the elevator shaft
and verify that the lift does not run.
• Make sure you have a copy of the Owner’s
Manual. A digital copy of the Owner’s Manual is
available at Ameriglide.com.
•
Check the key locks and emergency stop button
for functionality.
•
Check for any rust that may be developing.
Rust is expected in outdoor applications
(especially in coastal areas), but with proactive
maintenance or quick repair, this can be
minimized.
MAINTENANCE SCHEDULE
RECOMMENDED EVERY 6-MONTHS
• Check for motor gearbox leaks
•
Check wear pads for gaps
•
Lubricate ACME screw with Nook PAG-1 ACME
Screw Grease
• Check all structural connections/hardware
• Inspect the safety brake
•
Check the Battery Backup function (if installed)
•
Ensure the Power Cut-Off system works as
intended
• Check all interlocks, strikes and obstruction
sensors
RECOMMENDED ANNUALLY
• Replace batteries (if equipped)
Enclosure:
•
Screw drive should be inspected annually for
grease/ grease adequately if necessary
•
Safety switches should be checked for
functionality
• Depending on geographical area, unit may
need to have additional cosmetic maintenance
performed to prevent rusting.
• Waxing may be necessary to insure aesthetics
are upheld
•
IF equipped with a ventilation system, the
batteries should be inspected
We recommend this be performed by a qualified
service technician.
NOTICE