AmeriGlide STRATOS VPL, Инструкция по установке и обслуживанию

Страница: 12 / 44

STRATOS WITH ENCLOSURE:
Install Manual
25MAR2022 | 630-00147 C
12
PREPARATION
STRATOS WITH ENCLOSURE: SECTION 3
PLACING THE VPL
1. Depending on the height of the unit, it may
be shipped horizontal. You will need to stand
it up and place it where it will be fixed. If
laying down, the tower is extremely heavy.
Please take this into consideration when lifting
the tower.
Be sure to lift from the frame if using
machinery. DO NOT lift from the outside body
panels.
Position the lift in place according to its
dimensions. See Figure 3-1.
31.2" centerline
of 36" platform
and building
door to back of
unit (34.2 f"or
42")
Building side
36"
13.2"
Center the unit
on the building
door
13.375" machine
base to building
(11.59" if 3-wall)
Figure 3-1
2. Install the tower-side walls that will potentially
be against a structure onto the enclosure.
NOTE: The bottom vent panel that has the large hole for
the pit-switch will be on the other side of the tower.
NOTE: See the drawing of enclosed in the small parts of
the enclosure.
To install the panels, you will remove the
screw that's in the tower and mount the side
panel. See Figure 3-2.
Use screws
from the side
of the VPL
Install these panels
Lower panels have
vent holes. Concave
side faces the
platform.
Figure 3-2
3. Un-pack the enclosure parts. If you've ordered
an enclosure with acrylic windows, they'll
arrive with a paper or plastic protector on all
but the outside edges of the windows. You
should leave these protectors on the windows
until you are ready to finalize the installation.
Be careful not to scratch the powder coat on
any of the parts.
NOTE: When building against a wall, you will have to
access the components from the inside tower instead
of the outside. The smooth side of all panels face to the
inside of the unit.
4. Put the enclosure alignment plate across the
ends of the two tower legs. The plate is to
ensure that you achieve the correct spacing of
the vertical panels to the lift. See Figure 3-3.