AMCI SD17060E2, Руководство пользователя

Страница: 113 / 144

20 Gear Drive, Plymouth Ind. Park, Terryville, CT 06786

Tel: (860) 585-1254 Fax: (860) 584-1973 http://www.amci.com
Networked Indexer/Driver User Manual
S
ET THE
IP A
DDRESS
113
2.2c Use the AMCI Net Configurator Utility (continued)
2.2c.6 Press the [SCAN] button and Connect to the Networked Driver
Pressing the [Scan] button will open the window shown in figure T2.5. The Networked Driver will appear in
the scan list only if the unit and your network interface are on the same subnet. Optionally, you can press the
[Manual Connect] button and enter the IP address of the unit.
Figure T2.5 Scan for SMD34E2
If scanning for the Networked Driver, click on the IP Address of the unit and click on the [Connect] button.
The Net Configurator utility will connect to the unit.
2.2c.7 Click on the "Allow IP..." Checkbox to Access the IP Settings
Figure T2.6 below shows the screen that results when you are connected to the Networked Driver. In order to
change the IP Address of the unit, you must first click on the checkbox next to the text “Allow IP configura-
tion changes. You will need to restart the device.” Once the checkbox is selected, the [Set IP Address] and
protocol select buttons will be enabled.
Figure T2.6 Enable IP Address Changes