Amazone KE 2501 Special, Руководство по эксплуатации

Страница: 31 / 174

General Safety Instructions
KE/KX/KG (RIGID) BAH0089-7 02.2020 31

When turning corners, observe the permitted bending and dis-
placement of the universal joint shaft.

Before switching on the PTO shaft, check that the selected PTO
shaft speed of the tractor matches the permitted drive speed of
the implement.

Instruct everyone to leave the danger area of the implement
before switching on the PTO shaft.

While work is being carried out with the PTO shaft, there must
be no one in the area of the PTO or universal joint shaft while it
is turning.

Never switch on the PTO shaft while the tractor engine is turned
off.

Always switch off the PTO shaft whenever excessive bending
occurs or it is not needed.

WARNING! After the PTO shaft is switched off, there is a danger
of injury from the continued rotation of freewheeling implement
parts.
Do not approach the implement too closely during this time. You
must only start work on the implement once all implement parts
are at a complete standstill!

Secure the tractor and implement against unintentional starting
and unintentional rolling away before you perform any cleaning,
servicing or maintenance work on PTO shaft-driven implements
or universal joint shafts.

After uncoupling the universal joint shaft, place it on the holder
provided.

After removing the universal joint shaft, attach the protective
sleeve to the PTO shaft stub.

When using the travel-dependent PTO shaft, note that the PTO
shaft speed depends on the drive speed, and that the direction
of rotation reverses when you drive in reverse.