Amazone KE 2501 Special, Руководство по эксплуатации

Страница: 132 / 174

Use of the implement
132 KE/KX/KG (RIGID) BAH0089-7 02.2020
DANGER

Before transportation, carry out a visual check that the upper and
lower link pins are secured with the original linch pins against un-
intentional release.

Before transportation, fasten the side locking device of the trac-
tor lower link so that the mounted or towed implement cannot
swing back and forth.

When turning corners, take into consideration the wide sweep
and the centrifugal mass of the implement.

Drive in such a way that you always have full control over the
tractor with the attached implement. In so doing, take your per-
sonal abilities into account, as well as the road, traffic, visibility
and weather conditions, the driving characteristics of the tractor
and the influence of the mounted or attached implement.

It is forbidden to ride on the implement as a passenger and/or to
climb onto implements while they are running.
WARNING
Risk of being crushed, caught or struck by damaged compo-
nents or foreign objects ejected by the implement!
Observe the permissible implement drive speed before switching on
the tractor PTO shaft.
CAUTION
Danger from failure of the universal joint shaft in case of exces-
sive bending of the driven universal joint shaft!
Observe the permitted bending of the driven universal joint shaft
when lifting the implement. Excessive bending of the driven universal
joint shaft causes increased, premature wear to or immediate de-
struction of the universal joint shaft.
Switch off the PTO shaft of the tractor immediately if the lifted imple-
ment makes a lot of noise while running.
CAUTION
Danger from failure during operation when the overload clutch
engages!
Switch off the PTO shaft of the tractor immediately if the overload
clutch engages. This avoids damaging the overload clutch.