Amazone KE 2501 Special, Руководство по эксплуатации

Страница: 124 / 174

Settings
124 KE/KX/KG (RIGID) BAH0089-7 02.2020
8.6.1 Setting with decentralised levelling board adjustment
Always perform the same settings on all adjuster segments.
To adjust the levelling board to the desired
height, proceed as follows:
1. Remove the operating tool from the parking
position (Fig. 61/1, see page 78) and fit in
on the adjustment device (Fig. 130/1).
Fig. 129
CAUTION
Danger due to the operating tool
swinging out!
Before releasing the locking mecha-
nism, hold the operating tool (Fig.
130/3) with a tight grip!
2. Release the locking pin by turning it (Fig .
129/1).
3. Adjust the levelling board to the desired
height (Fig. 130/3) by turning (Fig. 130/2)
the operating tool.
For plough seeding, adjust the levelling
board such that a small ridge of soil is al-
ways pushed ahead of the bar to even out
any undulations.
For mulch seeding, adjust the levelling
board high enough for crop residues to be
able to pass underneath.
Fig. 130
4. After the adjustment procedure, the locking
pin must latch in completely.