General Safety Instructions
KE/KX/KG (RIGID) BAH0089-7 02.2020
25
2.16.1 General safety instructions and accident prevention instructions
In addition to these instructions, also comply with the generally
valid national and safety and accident prevention regulations!
The warning signs attached on the implement provide important
instructions for safe operation of the machine. Compliance with
these instructions is essential for your safety!
Before moving off and starting up the implement, check the im-
mediate area of the implement (children). Ensure that you can
see clearly.
It is forbidden to ride on the machine or use it as a means of
transport!
Drive in such a way that you always have full control over the tractor
with the attached machine.
In so doing, take your personal abilities into account, as well as
the road, traffic, visibility and weather conditions, the driving
characteristics of the tractor and the connected or coupled im-
plement.
Coupling and uncoupling the implement
Only connect and transport the implement with tractors suitable
for the task.
When connecting implements to the tractor's three-point hydrau-
lic system, the attachment categories of the tractor and the im-
plement must always be the same!
Connect the implement to the prescribed equipment in accord-
ance with the specifications.
When coupling implements to the front or the rear of the tractor,
the following may not be exceeded:
The permissible total tractor weight
The permissible tractor axle loads
The permissible load capacities of the tractor tyres
Secure the tractor and the implement against unintentional roll-
ing before coupling or uncoupling the implement.
It is forbidden for people to stand between the implement to be
coupled and the tractor while the tractor is approaching the im-
plement.
Any helpers may only act as guides standing next to the vehi-
cles, and may only move between the vehicles when both are at
a standstill.
Before the implement is connected to or disconnected from the
tractor's three-point hydraulic system, secure the operating lever of
the tractor hydraulic system such that unintentional raising or lower-
ing is impossible.
When coupling and uncoupling implements, move the support
equipment (if available) to the appropriate position (stability).
When actuating the support equipment, there is a danger of inju-
ry from contusion and cutting points!
Be particularly careful when coupling the implement to the tractor
or uncoupling it from the tractor! There are nip and shear points
in the area of the coupling point between the tractor and the im-
plement.
Содержание KE 2501 Special
