Amazone KE 2501 Special, Руководство по эксплуатации

Страница: 17 / 174

General Safety Instructions
KE/KX/KG (RIGID) BAH0089-7 02.2020 17
2.10 Design changes
You may make no changes, expansions or modifications to the im-
plement without the authorisation of AMAZONEN-WERKE. This also
applies when welding support parts.
Any expansion or conversion work shall require the written approval
of AMAZONEN-WERKE. Only use modification and accessory parts
approved by AMAZONEN-WERKE so that the type approval, for ex-
ample, remains valid in accordance with national and international
regulations.
Vehicles with an official type approval or with equipment connected to
a vehicle with a valid type approval or approval for road transport
according to the German road traffic regulations must be in the state
specified by the approval.
WARNING
Risk of crushing, cutting, being trapped or drawn in, or impact
through the failure of support parts.
It is strictly forbidden to

drill holes in the frame or on the running gear.

increase the size of existing holes on the frame or the running
gear.

weld on load-bearing parts.
2.10.1 Spare and wear parts and aids
Immediately replace any implement parts which are not in a perfect
state.
Use only genuine AMAZONE spare and wear parts or the parts
cleared by AMAZONEN-WERKE so that the operating permit retains
its validity in accordance with national and international regulations. If
you use wear and spare parts from third parties, there is no guarantee
that they have been designed and manufactured in such a way as to
meet the requirements placed on them.
AMAZONEN-WERKE shall accept no liability for damage caused by
the use of non-approved spare and wear parts or aids.
2.11 Cleaning and disposal
Handle and dispose of any materials used carefully, in particular

when carrying out work on lubrication systems and equipment
and

when cleaning using solvents.
2.12 Workstation of the operator
The implement must be operated by only one person from the driver's
seat of the tractor.